COS D1 MK 2 DAC 192 KHZ
COS Engineering D1 MK 2 DAC 192 KHZ
Posted On
17.01.2020Last Update On
17.01.2020
Description
Original Description is in
English, other language texts are translations and can contain errors.
EnglishDeutschTurkish
UPC:
COS D1 MK 2 DAC 192 KHZ
Condition:
Used
Weight:
18.00 KGS
Minimum Purchase:
1 unit
Maximum Purchase:
1 unit
Shipping:
Calculated at Checkout
Boxed, excellent condition 1 year warranty
Factory upgraded with MK2 PCBS
This is a superb DAC that retails at £8000.00
COS Engineering’s proprietary algorithm up-samples original data to 176.4K or 192K, 24-bit by a process in an array of 4096 with 32-bit precision. To rule out phase contamination that may stem from the more computationally efficient IIR filter, a linear-phase delay FIR filter is chosen. This massive computation is handled by a powerful DSP capable of 3648 MMAC (millions multiply and add) per second.
BUFFER AND RE-CLOCKING
D2 receives data from digital sources, whether a PC, a CD transport, or a mobile device, aligns them in exact frames with a one-second buffer, and sends them out for interpretation by the COS algorithm. The data so processed is then converted to analog signals, under the coordination of a crystal oscillator with a jitter precision less than 1ps and a dedicated re-clocking circuitry.
POWER
D2 harnesses two selected switching mode power supplies with specially designed circuitry for lower noise. These power supplies work with 100~240VAC; there is no need to select voltage.
FULL BALANCED DESIGN
Balanced designs are applied throughout the entire audio signal path. Even-order harmonics on the differential signal pairs are carefully matched and are thus gracefully cancelled in order to achieve the lowest possible distortions.
GALVANIC ISOLATION
The galvanic isolation between digital and analog circuitries further ensures that the audio signal is not to be contaminated.
VOLUME CONTROL (D2V ONLY)
D2’s volume control is composed of a ladder of +-0.1% high precision resistors and an array of analog switches which are low in resistance, noise, and distortion. No mechanical parts are used. Frequent use does not erode its precision.
UPC:
COS D1 MK 2 DAC 192 KHZ
Bedingung:
Verwendet
Gewicht:
18,00 KGS
Minimum Purchase:
1 Einheit
Maximaler Einkauf:
1 Einheit
Versand:
Berechnet an der Kasse
ausgezeichneter Zustand 1 Jahr GarantieFactory upgraded mit MK2 PCBS
Dies ist ein hervorragender DAC, der für 8000,00£
COS Engineering proprietäreAlgorithmus up-samples Originaldaten auf 176.4K oder 192K, 24-Bit von einem Prozess in einem Array von 4096 mit 32 -Bit Präzision. Um eine Phasenkontamination auszuschließen, die durch den recheneffizienteren IIR-Filter entstehen kann, wird ein linearer Phasenverzögerungs-FIR-Filter gewählt. Diese massive Berechnung wird von einem leistungsstarken DSP verarbeitet, der 3648 MMAC (Millionen multiplizieren und hinzufügen) pro Sekunde.
BUFFER UND RE-CLOCKING
D2 empfängt Daten aus digitalen Quellen, ob PC, CD-Transport oder mobiles Gerät, richtet sie in exakten Frames mit einem Ein-Sekunden-Puffer aus und sendet sie zur Interpretation durch den COS-Algorithmus. Die so verarbeiteten Daten werden dann in analoge Signale umgewandelt, unter der Koordination eines Kristalloszillators mit einer Jittergenauigkeit von weniger als 1 ps und einer dedizierten Neutaktschaltung.
POWER
D2 nutzt zwei ausgewählte Schaltstrom-Netzteile mit speziell entwickelten Schaltungen für weniger Rauschen. Diese Netzteile arbeiten mit 100 bis 240VAC; Voltage.
FULL BALANCED DESIGN
Balanced Designs werden über den gesamten Audiosignalpfad angewendet. Gleichmäßige Oberschwingungen an den Differentialsignalpaaren werden sorgfältig aufeinander abgestimmt und somit anmutig abgebrochen, um möglichst gering wie möglich Verzerrungen zu erzielen.
GALVANIC ISOLATION
Die galvanische Trennung zwischen digitalen und analogen Schaltungen sorgt zudem dafür, dass das Audiosignal nicht kontaminiert wird.
VOLUME CONTROL (D2V ONLY)
D2 besteht aus einer Leiter von +-0,1% hochpräzisen Widerständen und einer Reihe von analogen Schaltern, die wenig Widerstand, Rauschen und Verzerrung aufweisen. Es werden keine mechanischen Teile verwendet. Häufige Verwendung untergräbt seine Präzision nicht.
UPC:
COS D1 MK 2 DAC 192 KHZ
Koşul:
18,00 KGSMinimum Satın Alma:
1 birim
Maksimum Satın Alma:
1 birim
Shipping:Ödemede hesaplanmış
mükemmel durum 1 yıl garanti
Fabrika MK2 PCBS
ile yükseltilmişBu £ 8000.00
COS Engineering tescilli algoritması up-örnekleri orijinal veri perakende mükemmel bir DAC 176.4K veya 192K, 24-bit 32 ile 4096 bir dizi bir süreç tarafından -bit hassasiyet. Daha hesaplamalı verimli IIR filtresinden kaynaklanabilecek faz kontaminasyonunu ekarte etmek için doğrusal faz gecikmeli FIR filtresi seçilir. Bu büyük hesaplama saniyede 3648 MMAC (milyonlarca çarpma ve eklemek) yeteneğine sahip güçlü bir DSP tarafından işlenir
TAMPON VE TEKRAR SAATLEME
D2, ister bilgisayar, ister CD taşıma, ister mobil aygıt olsun, dijital kaynaklardan verileri alır, bunları tam kareler halinde bir saniyelik arabellekle hizalar ve COS algoritması tarafından yorumlanması için gönderir. İşlenen veriler daha sonra analog sinyallere dönüştürülür, 1ps'den daha az bir titreme hassasiyeti ve özel bir yeniden saat devresi ile kristal osilatörün koordinasyonu altında
POWER
D2, daha düşük gürültü için özel olarak tasarlanmış devrelere sahip iki seçili anahtarlama modu güç kaynağından yararlanıyor. Bu güç kaynakları 100 ~ 240VAC ile çalışır; voltaj seçmenize gerek yoktur.
TAM DENGELI TASARIM
Tüm ses sinyali yolu boyunca dengeli tasarımlar uygulanır. Diferansiyel sinyal çiftlerinde çift sıralı harmonikler dikkatle eşleşir ve böylece mümkün olan en düşük distorsiyonları elde etmek için zarif bir şekilde iptal edilirler.
GALVANİk İzOLASYON
Dijital ve analog devreler arasındaki galvanik izolasyon, ses sinyalinin kirlenmemesini daha da sağlar.
VOLUME CONTROL (SADECE D2V)
D2'nin ses kontrolü +-0,1% yüksek hassasiyetli rezistanslardan oluşan bir merdiven ve direnç, gürültü ve distorsiyon açısından düşük analog anahtarlardan oluşur. Mekanik parça kullanılmaz. Sık kullanım hassasiyetini aşındırmaz.