Vertere Mystic 0.5mV Moving Coil Cartridge
Vertere Mystic 0.5mV Moving Coil Cartridge
Posted On
26.10.2020Last Update On
18.05.2021
Description
Original Description is in
English, other language texts are translations and can contain errors.
EnglishDeutschTurkish
UPC:
Vertere Mystic 0.5mV Moving Coil
Condition:
Used
Weight:
0.50 KGS
Minimum Purchase:
1 unit
Maximum Purchase:
1 unit
Shipping:
Calculated at Checkout
Excellent, new and unused.
Once the decision has been made on the motor system depending on the target market and to a small extent personal predilection, the key to designing – for all but the most extreme of high end
cartridges – is to balance the design parameters: to deliver a cartridge that stays in the groove, retrieves the maximum musical information and is least affected by old or damaged records.
There are of course extremes in the world of hi-fi – extremes where the designer optimises one parameter almost to the exclusion of others – and these products are often the most talked about as
they are loved or detested in spades.
But this is not the Touraj way: he doesn’t want a system that favours closed miked jazz over rock or symphonic over punk. He wants a system that allows most records in a collection to be played and enjoyed In his view a hi-fi enthusiast with a small record collection just does not have the right system yet.
When Vertere launched the DG-1 Touraj said: “The job of a record player is very simple, and very linear it has to allow the most accurate measurement of a something going past the stylus and
throwing it from side to side over 1000 times every centimetre.”
The situation hasn’t changed except in this story the focus is the cartridge including the cantilever and diamond stylus which is the part that’s actually being thrown about over 1000 times every centimetre of record travel.
The Mystic Moving Coil in bullets
• The body is machined from solid aluminium alloy
• The body is mass-tuned to the generator for optimum support and control of unwanted mechanical vibrations
• Threaded body to accept the supplied stainless steel thumb screws for correct coupling of the cartridge body to the tonearm headshell
• Three specifically designed contact points are machined into the top of the body that provide the exact mechanical coupling required.
• Alignment ridge on the front top that assists mounting Mystic to any Vertere tonearm
• The low mass generator utilises a Samarium-Cobalt magnet with a low-mass cross coil made of pure virgin copper wires
• The aluminium 7000 telescopic tube cantilever maximises stiffness without a massive high Q peak
• Micro Elliptical diamond stylus tip that is designed for maximum tracking ability without compromising the high frequency response or increasing surface noise
• Bonded through diamond assembly maximises alignment and rigidity
Type Moving Coil Phono Cartridge
Mounting M2.5 Threaded Holes
Special Tri-Point Contact
Output level 0.5mV
Frequency response 10 Hz -40 kHz (-3dB)
Coil Impedance (per Channel) 40Ω
Recommended load 680 Ω – 1k5 Ω
220pF – 470 pF
Channel balance Better than 1.0 dB
Two-piece Telescopic
Stylus Micro Elliptical Diamond
UPC:
Vertere Mystic 0.5mV Moving Coil
Condition:
Used
Weight:
0.50 KGS
Minimum Purchase:
1 unit
Maximum Purchase:
1 unit
Shipping:
Berechnet an der Kasse
Excellent, new and unused.
Sobald die Entscheidung über das Motorsystem je nach Zielmarkt und in geringem Maße auf persönliche Vorliebe getroffen wurde, ist der Schlüssel zum Entwerfen – für alle, bis auf die extremsten High-End
Kartuschen – die Balance der Designparameter: eine Patrone zu liefern, die im Groove bleibt, die maximale musikalische Information abruft und am wenigsten von alten oder beschädigten Schallplatten betroffen ist.
Es gibt natürlich Extreme in der Welt des HiFi – Extreme, bei denen der Designer einen Parameter fast unter Ausschluss anderer optimiert – und diese Produkte werden oft am meisten als
sie werden in Pik geliebt oder verabscheut.
Aber das ist nicht der Touraj-Weg: Er will kein System, das geschlossenen Miked Jazz gegenüber Rock oder Symphoniker gegenüber Punk bevorzugt. Er will ein System, das es ermöglicht, die meisten Platten in einer Sammlung zu spielen und zu genießen
. Als Vertere die DG-1 Touraj lancierte, sagte er: "Die Arbeit eines Plattenspielers ist sehr einfach und sehr linear, es muss die genaueste Messung eines etwas ermöglichen, das am Stift vorbeigeht
und ihn über 1000 Mal jeden Zentimeter von Seite zu Seite wirft."
Die Situation hat sich nicht verändert, außer in dieser Geschichte liegt der Fokus auf der Patrone einschließlich des Auslegers und des Diamantstifts, der tatsächlich etwa 1000 Mal pro Zentimeter Rekordreise geworfen wird.
Die Mystic Moving Coil in Kugeln
• Der Körper wird aus massiver Aluminiumlegierung bearbeitet
• Der Körper ist massenabgestimmt auf den Generator für eine optimale Unterstützung und Kontrolle unerwünschter mechanischer Vibrationen
• Gewindekörper zur Aufnahme der mitgelieferten Edelstahl-Daumenschrauben zur korrekten Kopplung des Kartuschenkörpers an die Tonarmkopfschale
• Drei speziell entwickelte Kontaktpunkte werden in die Oberseite des
Gehäuses bearbeitet. • Ausrichtungsrücken auf der Vorderseite, der die Montage von Mystic an jedem Vertere-Tonarm unterstützt
• Der Low-Mass-Generator verwendet einen Samarium-Kobalt-Magneten mit einer low-masse Cross Spule aus reinen nativen Kupferdrähten
• Das Aluminium 70 00 Teleskoprohrausleger maximiert die Steifigkeit ohne massive hohe Q-Spitze
• Micro Elliptical Diamant-Stiftspitze, die für maximale Tracking-Fähigkeit ausgelegt ist, ohne den hohen Frequenzgang oder die Erhöhung des Oberflächenrauschens zu beeinträchtigen
• Durch Diamantbaugruppe verbunden Ausrichtung und Steifigkeit
Type Moving Coil Phono Cartridge
Montage M2.5 Gewindebohrungen
Spezial Tri-Point Contact
Ausgangspegel 0,5mV
Frequenzausgang 10 Hz -40 kHz (-3dB)
Spulenimpedanz (pro Kanal) 40
Empfohlene Last 680 Ω – 1k5 Ω
220pF – 470 pF
Channel-Balance Besser als 1,0 dB
Zweiteiliger Teleskop
Stylus Micro Elliptical Diamond
UPC:
Vertere Mystic 0.5mV Hareketli Bobin
Durum:
Used
Weight:
0.50 KGS
Minimum Satın Alma:
1 birim
Maksimum Satın Alma:
1 birim
Shipping:
Ödemede hesaplandı
:Mükemmel, yeni ve kullanılmayan.
Hedef pazara bağlı olarak motor sistemi üzerinde karar verildikten sonra ve küçük bir ölçüde kişisel tercih, tasarım anahtarı - tüm ama yüksek uç
karkar en aşırı için - tasarım parametrelerini dengelemek için: oluk kalır bir kartuş teslim etmek, maksimum müzik bilgileri alır ve en az eski veya hasarlı kayıtları etkilenir.
Hi-fi dünyasında elbette aşırı lıklar vardır – tasarımcının neredeyse başkalarının dışlanması için bir parametreyi optimize ettiği uçnoktalar - ve bu ürünler genellikle en çok konuşulan lar
onlar maçalarda sevilir veya nefret edilirler.
Ama bu Touraj yolu değil: o rock veya punk üzerinde senfonik üzerinde kapalı miked caz lehine bir sistem istemiyor. O bir koleksiyonda en kayıtları n için çalınması ve zevk sağlayan bir sistem istiyor Onun görüşüne göre küçük bir kayıt koleksiyonu ile bir hi-fi meraklısı sadece henüz doğru sisteme sahip değil.
Vertere DG-1 Touraj başlattı zaman şöyle dedi: "Bir kayıt çalar işi çok basit ve çok doğrusal bir şey kalemi geçmiş gidiyor ve
her santimetre üzerinde 1000 kez yan yana atma izin vermek zorundadır."
Bu hikayedışında durum değişmedi odak noktası, her santimetrelik rekor seyahatin yaklaşık 1000 katından fazla fırlatılan kısım olan cantilever ve elmas kalemi de dahil olmak üzere kartuş
Kurşunlarda Mistik Hareketli Bobin
• Gövde katı alüminyum alaşımdan işlenir
• Gövde, istenmeyen mekanik titreşimlerin optimum desteği ve kontrolü için jeneratöre kütle ayarlıdır
• Kartuş gövdesinin tonearm headshell'e doğru bir şekilde tutturmak için verilen paslanmaz çelik başparmak vidalarını kabul etmek üzere dişli gövde
• Özel olarak tasarlanmış üç temas noktası, gerekli mekanik bağlantıyı sağlayan gövdenin üst kısmı haline getirilmiştir.
• Mystic'in herhangi bir Vertere tonearm'a monte edilemine yardımcı olan ön üst teki hizalama sırtı
• Düşük kütleli jeneratör, saf bakir tellerden yapılmış düşük kütleli çapraz bobine sahip Samaryum-Kobalt mıknatısı kullanır
• Alüminyum 700 00 teleskopik tüp kantilever masif bir yüksek Q tepe olmadan sertliği en üst düzeye çıkarır
• Yüksek frekans tepkisi veya artan yüzey gürültüsüödün vermeden maksimum izleme yeteneği için tasarlanmış Mikro Eliptik elmas kalem ucu
• Elmas montaj ile yapıştırılmış maksimize hizalama ve rijitlik
Tip Hareketli Bobin Fono Kartuş
Montaj M2.5 Dişli Delikler
Özel Üç Noktalı Temas
Çıkış seviyesi 0.5mV
Frekans tepkisi 10 Hz -40 kHz (-3dB)
Bobin Empedansı ( Kanal başına) 40Ω
Önerilen yük 680 Ω – 1k5 Ω
220pF – 470 pF
Kanal dengesi 1,0 dB
İki parçalı Teleskopik
Stylus Mikro Eliptik Elmasdaha iyi