Raidho X2t – 25th Anniversary Edition
Celebrating 25 years of sonic excellence, the X2t Anniversary Edition is a collector’s loudspeaker designed for connoisseurs of both sound and design.
Overview:
- Based on the X2 platform, one of Raidho’s most successful models to date
- Only 100 pairs produced worldwide – each uniquely numbered and certified
- Updated crossover network for refined musicality and accuracy
- Premium Furutech binding posts for enhanced signal transfer
- Special high-gloss finishes: Walnut Burl, Emerald Green, and Midnight Blue
A Raidho special among floor standing loudspeakers is also the use of 2,5-way construction. The two 5,25” bass driver units in the new X2t, now has the Tantalum coating. Tantalum belongs to a class of metals known as refractory metals, which are defined by their strong, hard and stiff. Perfect for cone material.
The nonlimited version of the X2t is available parallel to the limited 25th anniversary edition.
Raidho Series X Drive Unit
This drive unit is not only highly advanced and built in-house in Denmark, but is also a piece of art.
The result is that the speakers disappear even more from the equation, drawing a soundscape without audible distortion and with a pitch-black background that made the instruments stand out and create holographic sound stage.
The Legendary Raidho Ribbon Tweeter
Our proprietary, trademark ribbon tweeter is a unique design. It is completely designed and build by hand in-house in Denmark. To be exact, it is a Planar Magnetic Tweeter due to the tracks in the foil. The foil is 11 micron thick, which means it is 50 times less mass in comparison to a conventional dome tweeter. This is because there is no voice coil and the extreme low weight of the foil (20 milligram). The result is virtually no resonances or distortion, and the breakup point is at an incredible 82 KHz! What you hear is amazing clear and natural sound. All the detail in the world, but no fatigue, no distortion, and no coloration!
Technical Information
Topology 2,5 way
Bass Loading Internal vented design. Ports in rear.
Drivers
1 x Raidho Ribbon tweeter
2 x 5,25” Raidho Ceramix driver
Crossover Point 220Hz and 3.5 kHz 2nd Order
Frequency Range 45 Hz - 50 kHz +/-3 dB
Sensitivity 88dB 2,83 V/m
Nominal Impedance 6 ohm
Power Requirement 50-150 Watts
Finish Black and White or custom color
Dimensions WxHxD, mm 300 x 1065 x 415 including feet
Enclosure WxD, mm 125 x 380
Weight, kg 23
