The New Kalalau Preamplifier Bella Sound, November 10, 2025

The new Bella Sound preamplifier gets its name, Kalalau – Road to Paradise, from the amplification path that takes input signals and sets them on a path to amplification paradise.

• Noise and linearity must be the chief concerns going into a truly high-end preamplifier design. For these concerns, low noise and high linearity are simultaneously achieved with a J-FET design.

• The inherent neutrality of a properly executed J-FET design does not benefit from the “voice” of any signal path capacitors, hence, none are used. Instead, high quality film capacitors bypass all four power supplies.

• The noise and linearity goals are furthered by the implementation of bulk foil naked resistors throughout the signal path.

• Multi-layered power supply filtration is lavished on the amplifier path to keep the signal in absolute pristine condition.

• Further care is taken by placing each of the amplifier channels and the power supply in separate faraday cages.

• The architecture is fully balanced from head to tail, including balanced attenuators and a full complement of XLR and RCA connectors at all 14 I/O’s.


Listening tests have confirmed the achievement of the desired goals: absolute tonal neutrality, fast and accurate dynamics, and the ability to hear deeply into the recording to the retrieval of astonishingly minute details.

Specifications

  • Gain: 10.3dB SE, 16.3dB Bal, attenuator maximum
  • Frequency Response: 1Hz – 400KHz, at 30dB reference attenuator setting
  • THD: 0.008% typ, 1Vrms, 1KHz
  • Output Noise: 50nV/root Hz typ, 1KHz
  • Signal/Noise Ratio: 103dB, 1Vrms output, 20KHz noise bandwidth, unweighted
  • Attenuation: 63 levels, 1dB steps
  • Input Impedance: 50k Ohms
  • Absolute Max Output Voltage: 10Vp
  • Power Consumption:
    Standby: 3.6W
    Active, all features invoked: 34W
    120/240 VAC, 50-60Hz
  • Inputs:
    In 1, In 2, In 3
    Tape In
    Home Theater Bypass In
    All SE (Cardas RCA) and Fully Balanced (XLR)
  • Outputs:
    Main Out
    Tape Out
    All SE (Cardas RCA) and Fully Balanced (XLR)
  • Dimensions: 19.3” W x 5.5” H x 16.9” D
  • Weight: 47 lbs

Documentos de Comunicado de Prensa

Dirección del Sitio Web

https://bellasoundaudio.com/
More Press Releases
June 24, 2025
Stax
The All-New SR-007S Electrostatic Earspeaker
The STAX SR-007 series (SR-007, SR-007A) is a milestone in the world of STAX electrostatic audio products. Since introducing the SR-007 in 1998, STAX has redefined electrostatic headphones, delivering an immersive listening experience marked by unparalleled detail, tonal accuracy, and comfort. With each evolution, the SR-007 series continues to embody the cutting edge of electrostatic audio products while celebrating the timeless design STAX is known. With the release of the SR-007S electrostati
Leer más
April 16, 2025
Shanling Audio
Introducing Shanling M3 Plus
M3 Plus comes with our brand-new curvy design and larger 4.7-inch display, fitting it into aluminium body that’s a little bit taller and slightly thicker than its predecessors. But this small increase in dimensions opened a whole new level of audio performance for the M3 Plus, thanks to a quad DAC design, utilizing four units of Cirrus Logic CS43198. We also significantly improved its balanced headphone output, with a pair of SGM8262 amplifiers now offering up to 800mW @ 32Ohm!
Leer más
July 22, 2024
Monitor Audio
Climate Series 3G
The all-new Climate Series 3G is designed to deliver true Monitor Audio high-fidelity performance. The two contemporary designs, small and medium in size, can withstand the toughest of outdoor environments, satisfying a demanding IP66 rating. Moreover, due to the sleek aesthetic design and ease of installation, Climate Series 3G is equally at home being discreetly installed inside as well as outside.
Leer más
SÍGUENOS