Davone Reference Three

Capturing the essence of the acclaimed Reference series into a simpler, elegant form, the Reference Three combines clarity and openness with a room-filling sense of atmosphere. Music is revealed with refinement and ease, making every performance both engaging and inviting

More than Beryllium

Due to its incredible rigidity, Beryllium represents the ultimate material for a tweeter dome. Where soft domes turn choirs into grain, hard rock into noise, Beryllium can separate the complex harmonics with ease and keep the music clean and precise, also at high listening levels. But we do not stop there. Opting for an unconventional approach, we mount the dome flush with the baffle, as opposed to the typical recessed placement, allowing the dome to unleash its wide off-axis response without obstruction—vital for achieving an expansive, open sound. This unique dome placement is a rarity, demanding meticulous baffle rounding to prevent diffraction and a more intricate crossover design. However, the resulting benefits outweigh the challenges. Complementing this design, we employ an exceptionally narrow surround to eliminate any lingering "soft dome" coloration. With a mere 0.1-gram moving mass and a magnetic flux density of 2.0 Tesla, our high frequencies reach reference-level quality.

A Cellulose Glass Composite

By combining cellulose with fine glass fibers, this cone material unites the best of two worlds. Cellulose brings damping qualities and warm, natural tone, while glass fibers add stiffness and control, reducing unwanted resonances. The coating process further stabilizes the cone and ensures consistent performance across the audible spectrum. Where traditional paper membranes can introduce colorations at higher levels, the Cellulose glass composite maintains neutrality and detail, even under demanding dynamics. Supporting this, a Balanced Drive motor structure minimizes distortion by keeping the voice coil motion symmetrical, ensuring clarity and precision throughout the range. This careful balance allows the woofer to deliver a smooth, natural midrange together with an articulate and well-controlled bass. The result is a driver that is both musical and precise—an ideal foundation for the Reference Three, offering an engaging, open sound with a remarkable sense of ease.

Specifications

Frequency response 38 - 30.000 Hz, -3dB
Impedance ohm minimum
Sensitivity 86 dB/2,83V/m
Recommended Amplifer 100 watt or more
Woofer 7" coated Cellulose glass fiber blend
Tweeter Flush mount 1" Beryllium with extremely light 0.1g dome and a first breakup mode above 40kHz
System bass reflex with a linear port
Cabinet Construction 25mm form pressed plywood baffle and tuned absorber
Weight 20 kg / piece
Height / Width / Depth 90 / 31 / 24 cm
Designer Paul Schenkel