Jeff Rowland Coherence One Jeff Rowland Coherence One Preamp

BUSCAR

Iniciar sesión / Registro

Inicio>Preamplificadores de Estado Sólido>Jeff Rowland>

Jeff Rowland Coherence One Preamp

Jeff Rowland Coherence One

23 vistas este mes

Última actualización 16.07.2026

Descripción Descripción original Inglés, Otras traducciones de idiomas son traducciones y pueden contener errores. Inglés Alemán Español Turco Very good.

Please note includes high level phono modules only. Low level not included, so as a result the phonostage does not work.

he preamplifier is designed to rest on top of its power supply so the user-friendly pair can be handled easily. Special shielding techniques allow for this configuration, and "hum field" contamination has been eliminated.

Lighted, feather-touch mode switches electronically control signal. The front panel switches do not alter sonic integrity, since signal switching is accomplished at the preamplifier input stage. Absolute phase reversal and full muting are other essential front panel control functions.

A selectable tape output section allows simultaneous recording from one source while listening to another. "Record Out: Off" position disconnects tape recorder inputs from tape out jacks, eliminating loading problems when tape recorder is not in use.

Volume controls are chosen for their sonic neutrality. Separate right and left trim potentiometers provide 6 dB adjustment for full rotation, permitting precise channel balance.

Input and output jacks are gold-plated, ground-fault protected connectors, which provide tight, corrosionfree connections. Simultaneous normal and inverting outputs allow for balanced cable operation.

Extremely low-noise phono sections eliminate the need for extra circuitry when using low output moving coil cartridges. The phono modules of the Coherence One Series II have been optimized for use with moving coil cartridges; for moving magnet cartridges, a module exchange can be easily accomplished by the user. Please contact Jeff Rowland Design Group from more details.

All main outputs are muted temporarily during initial power application, power drop or disruption. DC potential across outputs, regardless of source, will also cause a muted condition.

All signal amplification utilizes high-voltage, high-current, Class A field effect transistor technology.

All inputs and outputs are direct-coupled, thus eliminating the deleterious effects of capacitors in the signal path.

Precise RIAA equalization is the result of a split-passive network in the phono section.

Incorporation of two-stage power supply regulation: A separate outboard power supply provides tight regulation regardless of power company extremes. Additionally, this discrete component design is optimized for excellent transient behavior, thus providing very low output impedance beyond 100 kHz.

DC power is routed, via a power cable with a locking connector, to the main preamplifier circuit board. Compensating for power cable and circuit board inductance effects, sixteen (16) feedback-free discrete regulators adjacent to each module complete DC power distribution. This total system, in addition to separate channel balance controls, provides dual mono operation and precise regulation at each stage throughout.

Time-related distortion, particularly in low-level phono stages, is eliminated by a totally feedback-free design.

Mil-spec circuit board material, with oxygen-free copper traces and high-temperature mask provides superior electrical characteristics.

All signal switching is accomplished with hermetically sealed, gold- contact signal relays.

AC power line filter offers excellent line noise rejection.

All critical circuitry is encapsulated in a thermally-conductive epoxy to ensure excellent thermal stability, mechanical integrity and to facilitate ease of service

Coherence 1 Specs

Inputs Phono + 3 unbalanced line

Main outputs (per channel) 1 inverting, 1 non-inverting

Dimensions 12.5 in. W x 19 in. D x 3.75 in. H 31.8 cm W x 48.3 cm D x 9.5 cm H

Weight 29 lbs., 13 kg

Gain 60 dB

Frequency Response 0.15 Hz to 220 kHz, -3 dB

RIAA Accuracy 20 Hz to 20 kHz ± 0.15 dB; +0, -3 dB, 200 kHz

Input Impedance User selectable: 0-200 ohms adjustable, 47 k ohm fixed or any value.

THD and Noise < 0.025% @ 1 kHz, 0.7 V RMS output

Max Output Level 18 V RMS

Gain 19 dB

Frequency Response 0.06 Hz to 650 kHz, -3 dB

Input Impedance 10 k ohms

Output Impedance 300 ohms (single-ended output) 600 ohms (balanced output)

THD and Noise < 0.010% @ 1 kHz, 3 V RMS outpu

Añadir a favoritos

Emporium HiFi Fecha de registro July 2019

¡Verifica a este miembro!

11 La persona ha verificado.

Verificación de audioG del vendedor

Responde a los correos electrónicos, Verificado por audioG

Tiene un sitio web, Verificado por audioG

Todos los anuncios del vendedor 1082 Anuncio activo
2582 Anuncio de todos los tiempos

Número de mensajes
119 Mensajes (Todo el tiempo)

Precio: 990 GBP Cambios de precio >

Métodos de pago

Paquete

Envío El comprador paga

Costo de envío (Estimado)
Por favor, comuníquese con el vendedor

Lugar de envío
Norfolk NR35 - United Kingdom

Países de envío
el mundo entero

Política de devoluciones Este producto no admite devoluciones

Sobre Nosotros Política de Cookies Política de privacidad Términos de uso Política de Cancelación y Reembolso Contáctanos